A good Quality Score in Google Ads is 7 or above on a scale of 1 to 10. Scores below 5 are a warning sign that something is misaligned between your keyword, your ad or your landing page. To improve your Quality Score, you need to focus on three components in a specific order: expected click-through rate, ad relevance and landing page experience. This article breaks down how each one works, how Quality Score feeds into your actual cost per click, and how to fix low scores systematically.
What Quality Score Actually Is
Quality Score is a diagnostic metric Google assigns to each keyword in your account, on a scale from 1 to 10. It reflects how relevant and useful Google believes your ad and landing page are to someone searching that keyword.
It is not a direct bidding signal. Google does not use the visible Quality Score number in its auction calculations. Instead, it uses the underlying components, which are assessed in real time for every auction. The score displayed in your interface is a historical snapshot, updated periodically, that tells you how your ads have been performing against those three components.
Think of Quality Score as a report card, not a lever. The number itself does not change your results. Fixing what causes a low score does.
That distinction matters because some advertisers chase the number. The right goal is to improve the underlying signals, and the score will follow.
The Three Components, Explained
Every keyword in Google Ads gets a Quality Score made up of three sub-scores. Each one is rated as Above Average, Average or Below Average. Understanding what each one measures is the starting point for any fix.
Expected Click-Through Rate
Expected CTR measures how likely someone is to click your ad when it appears for a given keyword, compared to other advertisers competing for the same term. Google estimates this based on your historical CTR data, normalized for ad position and other factors.
If your ad consistently attracts fewer clicks than competing ads for the same keyword, Google interprets this as a signal that your ad is less relevant or less compelling. That drags down your expected CTR rating.
The fix here is usually about the ad copy itself. Your headline needs to match what the person typed. If someone searches for “accountant for freelancers” and your headline says “Professional Accounting Services,” you are leaving clicks on the table. A tighter match between search intent and headline copy is the most direct way to lift expected CTR.
Ad Relevance
Ad relevance measures how closely your ad copy matches the intent behind the keyword. It is distinct from expected CTR because it focuses on semantic alignment rather than click behavior.
A common cause of Below Average ad relevance is grouping too many loosely related keywords into the same ad group. If your ad group contains 40 keywords spanning several variations of a service, no single ad can be tightly relevant to all of them. Tighter ad groups, ideally built around a single theme or intent, produce higher ad relevance scores.
Exact match and phrase match keywords generally make it easier to maintain strong ad relevance than broad match, because the search terms triggering your ads are more predictable.
Landing Page Experience
Landing page experience assesses whether the page someone lands on after clicking your ad is genuinely useful, relevant and trustworthy. Google evaluates this using a combination of signals including page content, load speed, mobile usability and how directly the page addresses the search intent.
This is often the hardest component to improve because it requires changes outside of Google Ads. A slow page, a generic homepage used as the destination for every keyword, or a page that buries the information the user is looking for will all hurt this score.
The most common low-hanging fix is destination alignment. If you are sending traffic for “emergency plumber London” to your general services homepage instead of a page specifically about emergency plumbing in London, you are creating a relevance gap that Google will penalize.
How Quality Score Affects Your CPC
The connection between Quality Score and cost per click is real, and it is worth understanding precisely. Google determines ad rank using a formula that combines your bid with the quality components of your ad. A higher quality ad can achieve the same or better ad position at a lower bid than a lower quality competitor.
The practical implication: a keyword with a Quality Score of 8 will typically cost you less per click than the same keyword with a Quality Score of 4, assuming comparable bids. The gap can be significant. Industry benchmarks suggest a Quality Score of 10 can result in a CPC discount of around 50 percent compared to the benchmark, while a Quality Score of 1 can increase effective CPC by as much as 400 percent above that baseline.
These are estimates, not guarantees, because auction dynamics vary. But the directional principle is reliable: improving Quality Score reduces your cost to compete.
There is also a secondary effect. Higher Quality Scores improve your Ad Rank, which affects where your ad appears on the page. Better positions generally drive higher CTR, which in turn can further improve your expected CTR score. The relationship between Quality Score and CPC compounds over time when you fix it properly.
Fix Order by Impact
When you are looking at a keyword with a low Quality Score, the temptation is to fix everything at once. That approach makes it hard to know what actually moved the needle. Working through fixes in order of impact is more efficient and easier to measure.
Step 1: Fix Expected CTR First
Expected CTR has the most direct relationship with how much you pay per click and whether your ad competes effectively. Start by reviewing the ad copy in every ad group where you have Below Average or Average expected CTR ratings.
Rewrite headlines to include the keyword or a close synonym. Use the search terms report to understand exactly what people are typing and reflect that language back in your ads. Test specific, benefit-led copy rather than generic descriptions of your business.
If a keyword has very low historical impressions, Google has limited data to estimate expected CTR. In those cases, the rating may improve simply by accumulating more data once your copy is stronger.
Step 2: Restructure Ad Groups for Ad Relevance
If your ad relevance is Below Average, audit your ad group structure. Look for ad groups with large keyword lists covering multiple intents and split them into tighter groups. Each ad group should have a clear, single theme, with ad copy written specifically for that theme.
This work is unglamorous but durable. A well-structured account stays relevant over time. Overstuffed ad groups drift further from relevance as new keywords get added without corresponding ad updates.
Step 3: Improve Landing Page Experience
Landing page improvements require the most effort but can have a significant impact, especially if your pages are slow or misaligned with the keyword intent. Prioritize in this order:
- Match the destination page to the specific keyword intent, not just the general product category.
- Ensure the page loads quickly on mobile. Use Google PageSpeed Insights to identify specific issues.
- Make the value proposition and call to action visible without scrolling.
- Remove friction that might signal low trust, such as aggressive pop-ups or thin content.
If you are running multiple campaigns targeting different audiences or geographies, consider whether a single landing page is genuinely suitable for all of them. Dedicated pages for specific offers or locations often outperform generic pages on this component.
What a Good Quality Score Looks Like in Practice
A score of 7 to 10 is considered good. Scores of 5 and 6 are average, meaning your ads are competitive but not particularly efficient. Scores of 1 to 4 indicate a real problem with one or more components and are costing you money.
In a healthy account, you would expect most keywords to sit between 6 and 9. A handful of exact match, high-intent branded keywords often reach 9 or 10. Broad themes or competitive generic keywords tend to cluster around 6 to 7.
Scores of 3 or below on non-branded keywords deserve immediate attention. At that level, you are likely paying significantly more per click than competitors with better-structured campaigns.
Low Quality Score Fix: Identifying Which Keywords to Prioritize
Not every low-scoring keyword is worth fixing. Some keywords have low Quality Scores because they are genuinely marginal terms with little search volume and no conversion history. Spending time restructuring ad groups around keywords that have never converted is usually a poor use of effort.
Prioritize low-score fixes based on spend and conversion potential. If a keyword is spending budget but converting at a high cost per acquisition, and it has a Quality Score of 4 or below, fixing it is likely to have a measurable impact on your account efficiency.
Keywords with low Quality Scores and no conversions over a reasonable window should be evaluated differently. The question is whether the keyword is worth running at all, not just whether the Quality Score can be improved.
Reviewing low-scoring keywords on a weekly basis keeps this manageable. A short weekly audit focused on keywords scoring 5 or below, filtered by spend, is a practical habit that prevents waste from accumulating quietly in the background.
How Adsroid Copilot Supports Quality Score Work on Google Ads
Much of the work involved in improving Quality Score is structural: identifying which keywords are dragging performance, deciding whether to fix or pause them, and keeping the account clean over time. This is exactly where workflow discipline matters most, and where tools can help reduce the time between identifying a problem and acting on it.
Adsroid Copilot operates as an AI-assisted execution layer for Google Ads. Its workflow follows a Detect, Propose, Approve, Execute, Measure sequence. Rather than simply generating recommendations, it can carry out supported actions in your account once you approve them.
On the keyword side, Copilot can pause non-performing keywords and flag keywords exceeding configured CPC thresholds for review. This is directly relevant to low Quality Score management. When a keyword has a poor score and is driving up your effective CPC, Copilot can surface it, propose a pause or cost control action, and execute that action after your approval.
Copilot also adds high-converting search terms as keywords and excludes wasted search terms as negative keywords. Both of these actions support Quality Score indirectly by keeping your keyword list tighter and more intentional, which makes it easier to write relevant ad copy and maintain strong ad group structure.
Depending on your preferred level of control, you can run Copilot in three modes. In Manual mode, the AI makes recommendations but takes no action. In Copilot mode, the AI proposes actions and you approve them through the dashboard, by email or via AI Chat. In Autopilot mode, supported actions execute automatically within the rules and thresholds you have configured, such as a Critical CPC limit.
It is worth being clear about scope. Copilot does not rewrite ad copy or redesign landing pages. The structural creative and content work that directly improves expected CTR, ad relevance and landing page experience still requires human judgment. What Copilot handles is the execution layer: identifying what needs attention, proposing the right action and acting on it efficiently.
Common Mistakes That Keep Quality Scores Low
Even advertisers who understand Quality Score conceptually often repeat the same structural mistakes. Here are the ones that show up most frequently:
- Using one ad group for all variations of a service. Combining “cheap accountant,” “accountant for small business” and “tax accountant” into a single ad group makes it nearly impossible to write ad copy that is tightly relevant to all three.
- Sending all traffic to the homepage. The homepage is rarely the most relevant destination for a specific search query. It is designed to introduce your business, not answer a specific question.
- Letting broad match keywords accumulate irrelevant search terms. Every irrelevant impression that does not result in a click hurts your expected CTR. Regular negative keyword management is essential, not optional.
- Ignoring mobile load speed. A large share of search traffic happens on mobile. A page that loads in six seconds on a phone will consistently underperform on landing page experience, regardless of how good the content is.
- Treating Quality Score as a one-time fix. Accounts drift. New keywords get added, ad copy ages, landing pages change. Quality Score requires periodic review, not a single cleanup exercise.
Frequently Asked Questions
What is a good Quality Score in Google Ads?
A Quality Score of 7 or above is generally considered good. Scores of 8 to 10 indicate strong alignment between your keyword, ad copy and landing page. Scores of 5 to 6 are average and suggest room for improvement. Scores of 4 or below signal a significant relevance problem and usually result in higher CPCs.
Does a low Quality Score mean my ads won’t show?
Not necessarily. A low Quality Score means your ads will show less efficiently. You will pay more per click to achieve the same ad position as a competitor with a higher score. In highly competitive auctions, very low Quality Scores can make it difficult to compete at reasonable bids, but the ads themselves are not automatically excluded from serving.
How long does it take to improve Quality Score?
It depends on the volume of data Google is collecting. For high-traffic keywords, you can see scores update within days of making meaningful improvements. For low-volume keywords, it may take several weeks for enough impressions and clicks to accumulate for the score to reflect your changes. Focus on the components rather than watching the number daily.
Can I improve Quality Score without changing my landing page?
Yes, partially. Improving expected CTR through stronger ad copy and tightening ad groups for better ad relevance can lift a Quality Score even if the landing page stays the same. However, if the landing page experience component is rated Below Average, you will hit a ceiling without addressing it. The biggest gains usually come from improving all three components together.
Should I pause keywords with a Quality Score of 1 or 2?
It depends on the keyword’s conversion history and strategic value. A keyword that has never converted and has a Quality Score of 1 or 2 is almost certainly wasting budget. A keyword that converts reliably but scores low may be worth fixing rather than pausing. Evaluate low-scoring keywords based on spend, conversion rate and business value before making a decision.